NEC Univerge SV9100 - Install AC Power Cords on 19 Chassis

UNIVERGE SV9100 Issue 1.2
System Hardware Manual 3 - 15
1.1.5 Install AC Power Cords on 19” Chassis
1. Locate the supplied AC power cord and attach to the AC Inlet located
on the back of the Controlling Chassis.
Figure 3-23 19” Chassis Grounding Lug (Multiple-Chassis)
FG Lugs
Electrical
Service
Ground
Figure 3-24 Install the AC Power Cord
AC Inlet
CHS2UG