NEC Univerge SV9100 - Page 25

UNIVERGE SV9100
Issue 1.0
System Maintenance Manual
13
D2
Go to Flowchart C1.
Program
again.
Cancel
feature.
Done.
Program
again.
Done.
1. Perform Second Initialization, and test.
2. Perform First Initialization, and test.
3. Replace GCD-CP10, and test
Send terminal in
for repair.
Check to see if problem occurs on CO or internal
calls (including station-to-station or transferred
calls).
Check to see if station is call
forwarded or in DID.
Check PRG 15-07.
Check and adjust volume
control, and test again.
Check PRG 22-04 for ring
assignment.
Reset/replace station, then
reset or replace CD-8DLCA.
Multiline Terminal Ringing Problems
Intermittent
Problem?
Consistent
Internal
CO
Problem?
Both
Yes
Yes
Station in
Call Forward
or DID?
No
Wrong
Assignment?
No
Yes
Problem
Solved?
Yes
No
Reset/replace station,
then reset or replace
G CD-8DLCA.
Wrong
Assignment?
No
Yes
Problem
Solved?
No
Yes
No
Problem
Solved?