Setting the Clock
Use the On-Screen Display and the remote control unit to set the clock.
Before You Start
● The clock uses a 24-hour system.
● When you first plug in your VCR, the clock will read “- - - -”.
● While you are setting the clock, a menu on the TV screen will prompt you to go through the correct procedure.
● If you enter an incorrect number, press CURSOR (
FF
/
GG
) to clear the entry, then enter the correct number again.
14
PROCEDURE
:
1
Turn on the power of both the VCR and the TV.
2
Make sure that the TV is set to the VCR output channel.
3
Aim the remote control at the remote sensor window on the front panel of the VCR.
4
Press i on the remote control. The menu below will appear on the TV screen.
To Next Page
Loading...