Playing Back Video Cassettes
24
Normal Playback
1
Insert a pre-recorded video cassette in the VCR.
When the cassette is inserted, press PLAY to start playback.
The display “PLAY” will appear briefly on the TV screen and on the Multi-
Function Display. The playback speed of the tape will be selected automatically
by the VCR.
2
Press the STOP button to stop playback.
The display “STOP” will appear briefly on the TV screen and on the Multi-
Function Display.
● When the tape reaches the end during playback, the VCR will stop and start
rewinding automatically. When the rewinding finishes, the cassette tape will be
partially ejected and the power of the VCR will be turned off automatically.
Automatic Playback
If you insert a cassette tape into the VCR without the safety tab (or a piece of cellophane tape) in place, the VCR
will automatically function in sequence as follows:
● The power will be turned on.
● The VCR will start playback immediately.
● At the end of the cassette, the tape will be rewound automatically (AUTO REWIND) .
● The cassette will be ejected automatically when the rewinding is complete.
● The power will be turned off.
NOTE:
The cassette will be ejected when the EJECT button is pressed, even if the VCR’s power is OFF.
3
OPR (Optimum Picture Response)
This feature automatically improves playback picture quality by adjusting your
VCR to the condition of the tape.
Press i.
Press
FF
or
GG
to select OPR.
Press OK.
Press
DD
or
EE
repeatedly to select:
OFF, SOFT or SHARP.
Please note you may only set OPR
when playing a tape.
Press i to return to TV picture.
To Next Page
Loading...