29
Zero Stop
The Zero Stop function stops a tape automatically when the tape counter reaches 0:00:00. This feature can be used
to return the tape to a preselected position quickly after recording, or to playback a portion of a tape repeatedly.
1
Press OK to set the counter mode.
The tape counter display will appear on the TV screen.
Before playback or recording, press CLEAR to zero the counter.
The 0:00:00 indicator will appear on the TV screen.
Press REW. The tape will stop automatically when the counter
reaches 0:00:00.
NOTE:
● Press OK to change the tape counter display to clock mode.
5
To Next Page
Loading...