37
If Timer Recording Events Overlap...
Make sure that the preset times of the timer recording events do not overlap. If they do, the earlier programme will
always be given priority.
Example: Programme 1 is programmed to start at 10:30 and end at 11:30.
Programme 2 is programmed to start at 11:00 and end at 12:00
In this case, Programme 1 will be recorded in its entirety, but only the last 30 minutes of Programme 2
will be recorded.
PROGRAMME 1
PROGRAMME 2
12:0011:00
OVERLAPPED
PROGRAMME
(This part will not be recorded.)
10:30 11:30
To Next Page
Loading...