• Always make sure that the mains voltage is the same as that
indicated on the technical data label and that the system is com-
patible with the power of the appliance.
• Before each use, check the integrity of the appliance and con-
nect the power cord to the power supply only aer having veri-
fied that the data on the plate are compatible with those of the
electrical distribution. The manufacturer declines all responsibil-
ity for any damage to persons or property deriving from failure to
observe this standard.
• Never pull the cord to disconnect it from the electrical outlet.
Make sure that the cable is not in contact with hot or sharp sur-
faces. Do not use the appliance with the damaged cable.
• If the power supply cable is damaged, it must be replaced by
the Manufacturer or by its Technical Assistance Service or by a
similarly qualified person, in order to prevent any risk.
• Only connect the appliance to an AC outlet.
• In general, the use of adapters, multiple sockets and / or exten-
sions is not recommended. If their use becomes indispensable, it
is necessary to use only adapters and extensions in compliance
with current safety standards.
• In case of failure and / or malfunction of the appliance, do not
use it, switch it o and do not tamper with it. For any repairs, con-
tact only a center authorized by the manufacturer and request
the use of original spare parts. Failure to comply with the forego-
ing may compromise the safety of the appliance and may void
the warranty.
MANUALE UTENTE | pagina 24
To Next Page
Loading...