9
Monthly Cleaning Steps
9.
Remove the liquid waste bin, beeing
careful to take the float out of the
way. Clean it, then rinse it under hot
water.
While parts soak in the
bucket, use your food-safe
cleaning and sanitizing
spray, a towel and the
brushes to wipe clean the
other parts by following the
next steps.
IMPORTANT
Rinse and air dry parts
prior to reinstall in the
brewer.
Remove the drip panel from beneath the
dispensing area by unlocking it from each
side. Clean, then rinse it under hot
water. Air dry completely.
Unlock the drip tray from the back of the
dispensing area, then remove it from the
front. Clean, then rinse it under hot
water. Air dry completely.
10.10. 11.
8.
To Next Page
Loading...