nedis RDDBCR2000GN - Page 6

6
3. Plug the other end of the USB-C cable A
a
into a power
source or a power adapter (not included).
4. Plug the power adapter into a power outlet.
The battery indicator A
r
blinks to indicate the product is
charging. The battery indicator A
r
burns continuously to
indicate the product is fully charged.
Switching on the product
1. Extend the antenna A
8
.
2. Press and hold the MODE button A
3
to switch on the
product.
3. Press and hold the MODE button A
3
to switch on the
display A
4
.
4
The product automatically switches to standby after 15
minutes of inactivity.
4
The product automatically selects DAB mode and starts
scanning for DAB channels.
Navigating the interface
1. Press and hold the MENU/INFO button A
t
to enter the
menu.
2. Press the previous or next button A
ui
to navigate to the
desired option.
Changing the language
1. Enter the menu
2. Select System.
3. Press the SELECT/SCAN button A
y
.
4. Press the previous or next button A
ui
to select
Language.
5. Press the SELECT/SCAN button A
y
.
6. Press the previous or next button A
ui
to select the
desired language.
7. Press the SELECT/SCAN button A
y
.
Scanning for radio stations
Press the MODE button A
3
to cycle between DAB and FM
mode.
DAB mode
For automatic scanning:
1. Enter the menu
2. Select Station List.
3. Press the previous or next button A
ui
to select the
desired station.
4. Press the SELECT/SCAN button A
y
to start a station scan.