T V SAT
OK
VOL-
VOL+
P-
LEARN
0
7 8
9
4 5
6
1 2 3
2
3
0
11
9
4
6
8
7
5
TVRC21SNBK
Remote control
Description English
1. On/o button
Press the button to switch
the TV on or o.
2. TV button
Press this button to control
the TV.
3. Satellite button
Press this button to control
the set-top-box or other
programmed devices.
4. Previous program
button
Press the buttons to
navigate through the
programs.
5. Next program button
6. Volume - button
Press the button to increase
or decrease the volume.
7. Volume + button
8. OK button
Press the button to conrm
a selection.
9. Mute button
Press the button to mute
the sound..
10. Learn button
In learn mode, press the
button to activate the
signal before copying
functions from other
remote controls.
11. Digit buttons
Press the buttons to select
the channel.
12. LED indicator
The LED indicator shows
the status of the device.
Use
Programming the remote control to the TV or another
device
1. Switch on the device to be programmed.
2. Look for the brand of the TV that you want to program
in the code list. Make a note of the rst code in the list.
3. Press and hold the TV or satellite button of the remote
control until the LED indicator comes on.
4. Enter the previously identied code.
Note: If the LED indicator goes o, it indicates that
the code is accepted. If it switches on or o the TV, it
indicates that the code is correct. If it does not switch on
or o the TV, repeat from step 2 to try another code.
Auto search
1. Switch on the device to be programmed.
Specifications:
• Batteries:
2x AAA / LR03
(not incl.)
To Next Page
Need help?
General
