HomeConnect en
35
Set Wi-Fi
1. Press
.
2. To open the appliance settings,
press for 3 seconds.
a flashes.
3. Press
repeatedly until
and flash.
4. Press repeatedly until the
LEDs show the right value.
If LED A is not lit up, the wireless
network connection is switched off.
If LED A is lit up, the wireless net-
work connection is switched on.
5. To save the settings, press
for 3 seconds.
Activating Remote Start
1. Press .
2. To open the appliance settings,
press for 3 seconds.
a
flashes.
3. Press
repeatedly until
flashes.
4. Press repeatedly until the
LEDs show the right value.
If LED A lights up, the function is
permanently deactivated.
If LED A and LED B light up, the
function can be selected using the
button.
If LED A, LED B and LED C light
up, the function is permanently ac-
tivated.
The factory setting is level 2 (LED
A and LED B).
5. To save the settings, press
for 3 seconds.
Restoring factory settings
1. Press
.
2. To open the appliance settings,
press for 3 seconds.
a flashes.
3. Press
repeatedly until ,
and flash.
4. Press to set the appliance
back to the factory settings.
a The appliance is reset.
HomeConnect
16 HomeConnect
HomeConnect
This appliance is network-capable.
Connect your appliance to a mobile
device to control its functions via the
HomeConnect app.
The HomeConnect services are not
available in every country. The avail-
ability of the HomeConnect function
depends on the availability of
To Next Page
Loading...
Need help?
General
