Basic settings en
35
Basic setting Display text Selection Description
Gap illumination I01
1
I00 - I01 While the programme is running, a
strip of light appears on the left-hand
side of the appliance. If the appli-
ance door is not completely closed,
the strip of light will flash. The pro-
gramme has ended when the strip of
light is no longer visible on the left-
hand side.
Switch Gap illumination on "I01" or
off "I00".
Tone volume b02
1
b00 - b03 Adjustment of tone volume.
Level "b00" switches the signal tone
off.
If the Eco drying function is activ-
ated, the end of the programme is
not indicated by an audible signal
tone.
Open Dry o02
1
o00 - o02 Activate or deactivate automatic
opening of the appliance door during
the drying phase.
If the function has been activated,
the running time may increase.
The following settings are possible:
¡ With the setting "o00" automatic
door opening is deactivated in all
programmes.
¡ With the setting "o01" automatic
door opening is activated in all
programmes.
¡ With the setting "o02" automatic
door opening is activated only in
the Eco 50°C programme.
→"Open Dry", Page11
Wi-Fi Cn0 Cn0 - Cn1 Switch the wireless network connec-
tion on or off.
Level "Cn0" switches the wireless
network connection off.
The basic setting "Wi-Fi" is only avail-
able once the appliance is connec-
ted to the HomeConnect app.
→"HomeConnect ", Page36
1
Factory setting (may vary according to model)