WWW.SZNEO.COM IPCAM User Manual
Page 3
Click “search.exe”, Follow the tips，LAN tool is installed into the system and generated
on the desktop“IP Camera Search "
●2.2 Search the device and login
The LAN run search tools "IP Camera Search", the program will find the network
cameras and displays the search to the IP address, port number, the name. If WIFI
wireless connected, it will display the IP address of the wireless. As shown,
To select Basic information can change the parameters, click Set to save the changes
●and enter the IP address directly open the login authentication page (for example, enter:
http://192.168.1.222: 81 )to open the login screen as shown below shown,
Mouse over the icon will be prompted
1.Check the DHCP to obtain an IP
2.Manually rewrite the IP
parameters Port name
Shenzhen NEO Electronics Co., Ltd
Tel: 86 755 29642263、29642252、29642256、29642259 Fax: 86 755 29667746
To Next Page
Loading...
Need help?
General
