8
S ETTING UP A RENAISSANCE RECEIVER
How to Name the Receiver
. . . . .
How to Name the Receiver
It’s important to set a name for the computer/Receiver combination so that
students know they’re connecting to the right Receiver when they use NEO 2
for quizzes or assignments. This is especially important if your school has
more than one Renaissance Receiver. Follow these steps:
1. Start the Renaissance Wireless Server Utility:
• Windows computers: Right-click in the lower-right corner of your
computer screen (the system tray) and choose Manage from the
menu that appears. If you don’t see this icon in your system tray, click
Start or Programs (or All Programs) Renaissance
Wireless Server Renaissance Wireless Server Utility.
• Macintosh computers: In your computer’s Applications folder, open
the Renaissance Wireless Server folder. Then, double-click
Renaissance Wireless Server Utility.
2. Type 1234 and click OK to log in. (This is the default Administrator PIN. If
you have changed the PIN, enter your new PIN.) If necessary, click Start.
3. Click the Server Settings tab.
4. In the Network Name field, enter a new name for the Renaissance
Receiver. (Make sure the name is different from names used for your
other Renaissance Receivers.)
5. Click Update Network Settings.
6. Click OK when the program finishes updating network settings. Make
sure that any students who will be using NEO 2 or Responders to
complete quizzes or assignments know which Receiver name to connect
to.
The Renaissance
Wireless Server
Utility is
automatically installed with
AlphaSmart Manager. Make
sure you’ve installed
AlphaSmart Manager before
you follow these steps.
To Next Page
Loading...
