Rescue-harness connection
Rescue bridles are sewn directly to the attachment points on the shoulder straps.
Before installing your rescue parachute in the container, connect the rescue bridle to
the harness bridle on the right side of the harness. The connection should be made
with a maillon rapide nipped tight with a spanner, or a suitable soft shackle.
Two types of maillon rapide can be used :
- Square stainless steel maillon rapide Peguet 7mm
- Oval stainless steel maillon rapide Peguet 6mm
9 10
44
EN
To Next Page
Loading...
