To Next PageTo Next PageWhy does Neopost All in One Printer stop envelopes skewed?
If your Neopost All in One Printer is stopping envelopes skewed, the side guides of the envelope hopper might be set too wide. Inspect the side guides and adjust them if necessary.
What causes fingers placed on top of the envelope on Neopost All in One Printer?
If the fingers are placed on top of the envelope in your Neopost All in One Printer, the fingers might be adjusted too deep into the envelope; check the fingers' position and adjust if needed. Also, the envelope might be stopping too early; check the envelope stop position and adjust if needed.
What to do if document set not correctly inserted in Neopost All in One Printer?
If the document set is not correctly inserted in your Neopost All in One Printer, the insert position might not be correct; check the insert position. Alternatively, the insert fingers might not be correctly positioned; check the insert finger position.
Why address is not readable from window on Neopost All in One Printer?
If the address is not readable from the window on your Neopost All in One Printer, the address position might not be correctly defined. Check the address position settings.
General| Type | Document Inserting System |
|---|---|
| Model | DS-75i |
| Feeder Capacity | Up to 500 sheets |
| Optical Mark Recognition (OMR) | Yes |
| Optical Character Recognition (OCR) | Yes |
| Barcode Recognition | Yes |
| Double Document Detection | Yes |
| Input Capacity | Up to 500 sheets |
| Stacker Capacity | Up to 500 envelopes |
| Connectivity | USB, Ethernet |
| Folding Types | C, Z |
Essential safety requirements for system operation and handling.
Accessing help topics via the Help Menu and its options.
Overview of the folding and inserting system's functionality.
Overview of the system's physical controls and touch screen interface.
Understanding jobs, job lists, and job overview screens.
Procedures for loading documents and envelopes into feeders.
Steps to select and run a pre-configured job.
Guide to creating new automatic or manual jobs.
Configuring mail, document, fold, and exit settings for a job.
Procedures for editing, copying, deleting, and saving jobs.
Accessing and configuring operator and supervisor settings.
Steps to connect the system to a network via wired or wireless.
Running system tests and checking component status.
Routine maintenance tasks and their frequency.
Procedures for clearing jams in different system areas.
Table of common symptoms, possible causes, and remedies.
Details on model, speed, power, voltage, and approvals.
Capacities of standard, maxi, and high capacity feeders.
Definitions of terms used throughout the manual.
