Changing the Default ERA
How to Change the Default ERA
To change the default ERA:
1. As supervisor (see How to Log in as Supervisor on page 122):
Press and select the path: Default User Settings Default Imprint
Parameters ERA
2. Select the default ERA and press [OK] to validate.
See also
• Managing ERAs on page 161
Changing the Default Ad die
How to Change the Default Ad Die
To change the default Ad die:
1. As supervisor (see How to Log in as Supervisor on page 122):
Press and select the path: Default User Settings Default Imprint
Parameters Ad die
2. Select the default ad die from the list, or None for no ad die.
3. Press [OK] to validate.
See also
• Managing Ad Die on page 158.
You can order custom Ad Dies. Please contact your Customer
Service.
8
Configuring your Mailing System
141
| Page 141 | Nov-04-2015 12:27 |