In optional mode Differential Weighing ( ):
From the [Standard] home screen:
1. Place the stack of mail to process on the Weighing Platform, then follow the instructions
on the screen or the steps below.
2. Withdraw the first mail piece from the top of the stack. The Mailing System displays
weight and postage on the home screen and starts motors automatically.
3. To print the stamp, insert the mail piece into the base against the rear-guide wall, with
the side to be printed facing upwards.
If you want to seal the envelope, first engage the flap into the
moistener (option). Do not try to moisten self-adhesive envelopes.
4. The Mailing System applies postage and the mail piece is ejected.
5. Repeat the previous step for each piece of mail.
To quit the process at any time, press .
When you remove the last object from the Weighing Platform,
the Mailing System will ask if you want to print it. You can answer
Yes or No.
38
| Page 38 | Nov-04-2015 12:27 |
3
Processing Mail
To Next Page
Loading...
Need help?
General
