To implement the Remote account Management mode:
1.
Connect the PC to the Mailing System (see System Connections on page 330 ) and
start the accounting software on the PC.
2.
Change the 'Account mode' to Remote account management by following the
procedureHow to Activate 'Remote account management' mode on page 138 , set out
below.
3.
From the PC application, configure required accounts and operators: see the PC
application user guide.
If operators or accounts were already created on the Mailing
System, then they are deleted when switching to mode Remote
account management .
How to Activate 'Remote account management' mode
From the Account Mode Management screen (see Displaying 'Account Mode'
Management Menu on page 129)
1. Select the path: Account Mode Selection (or type 5 ).
The Account Mode Selection screen is displayed with the current 'Account mode'
selected.
2. Select Remote account management and press [OK] .
The following screen is displayed.
138
| Page 138 | mrt-11-2014 04:31 |
5
Account Management and Access Control
To Next Page
Loading...
Need help?
General
