Maintenance processes10.5
These processes are only to be completed on request from your Customer Service.
Check that your Mailing System is connected to a telephone line or the LAN before starting.
As supervisor (see How to Log in as Supervisor on page 218 ):
Press and type 7.4 or select the path:
Maintenance Service processes
1.
Update registration
-
This procedure is used if you have changed your address.
-
Contact Customer Service to change your information. You will be instructed to
perform the update registration procedure.
Performing the Update Registration Procedure to Change
Address
This procedure is used if you have changed your address. Contact Customer Service to
change your information. You will be instructed to perform the update registration procedure.
Check that your Mailing System is connected to a telephone line or the LAN before starting.
309
| Page 309 | | mrt-11-2014 04:31 |
10
Maintenance
To Next Page
Loading...
Need help?
General
