IS/IM300 Series - Replacement Guide
On your EXISTING mailing system:
On your REPLACEMENT mailing system:
1. Remove ink cartridge
8. Install ink cartridge3. Remove meter
7. Install meter6. Unbox unit & remove packing tape
5. Remove entry table 10. Attach entry table
2. Disconnect AC power
11. Connect AC power
4. Disconnect LAN cable or modem 9. Connect LAN cable or modem
If equipped, turn power switch to the ON position.
Save all parts that you have removed. They will be used in your
replacement mailing system.
The mailing system will begin the swap process.
See the next page to continue with the setup.
REV - 170410
A B
300 series replacement guide rev1017b.indd 1 10/13/2017 4:16:55 PM
To Next Page
Need help?
General
