Need help?Do you have a question about the Neousys POC-100 Series and is the answer not in the manual?
Provides a comprehensive overview of the POC-100 fanless embedded controller, its features, and benefits for deployment.
Details the technical specifications of the POC-100, covering processor, memory, I/O ports, power, and environmental operating conditions.
Instructions for unpacking the POC-100, listing included items and verifying package contents for completeness and condition.
Describes front panel connectors and controls, including Power Button, Reset Button, LED Indicators, USB, VGA, and Ethernet ports.
Details back panel connectors: USB ports, Speaker-out, COM ports (COM1/COM2), and power input options.
Covers internal connectors like status LEDs, remote control, PS/2, internal USB, optional COM ports, mSATA, mini-PCIe, SATA, LVDS, and power supply.
Presents mechanical dimensions with views (top, front, side, bottom) and measurement details for physical integration planning.
Step-by-step guide for installing a 2.5-inch HDD or SSD onto the POC-100's onboard SATA port using the provided bracket.
Instructions for installing an mSATA SSD module into the dedicated mSATA port on the POC-100 motherboard.
Guide on installing versatile mini-PCIe modules, such as WiFi cards, and attaching antennas for expanded system functionality.
Explains various mounting methods: inside-out, wall suspension, outside-in surface mount, and DIN rail clip installation.
Details connecting DC power via the DC jack (POC-100RK) or the 2-pin pluggable terminal block (POC-100ST).
Covers four methods to power on: front panel button, external switches (AT/ATX), and Wake-on-LAN function.
Guides through BIOS settings for COM ports, SATA controller, video, power failure, Wake-on-LAN, watchdog timer, and boot device selection.
Lists the operating systems officially tested and supported by Neousys Technology for the POC-100 device.
Instructions for installing all necessary drivers using the convenient "One-Click" utility from the Drivers & Utilities DVD.
Steps to install the Watchdog Timer (WDT) and Digital I/O (DIO) library for programming watchdog timer functions.
Provides reference for WDT library functions (InitWDT, SetWDT, StartWDT, ResetWDT, StopWDT) for programming watchdog timer.
To Next Page
General