Neoway M660 - Page 3

Neo_M660 AT Command Set
Copyright © Neoway Technology Co., Ltd
ii
Revision Record
Issue Changes Date
V3.0 Initial draft 2013-08-26
V3.1
Added the following commands: AT+OFFTIME, AT+FCHW,
AT+AUDIN, AT+AUDOUT, AT+IFC, AT+RINGTIME,
AT+TRANSCLOSE, AT+UDPTRANS, AT+TCPTRANS, and
AT+RINGOUT.
2013-09-02
V3.2

Deleted the command AT+TRANSCLOSE and use +++ to exit the
data mode.

Modified the default data format of the AT+DATAFORMAT
command.

Modified usage description of +++.

Modified the description of AT+TCPSEND
.

Modified the description of AT+TCPLPORT, AT+UDPLPORT, and
AT+FTPPUT
.
2013-09-17
V3.3 Added the echo suppression command AT+LESL
2013-10-09
V3.4

Modified the description of the following commands: +++ in the
transparent mode, AT+CLOSECLIENT, AT+IPSTATUS,
AT+TCPACK, and AT+CLIENTSTATUS.

Added the description of the ATO command in the transparent mode
and AT+TRABSCLOSE command.

Added the description of the AT+REST and AT+CPWROFF
commands.
2013-11-06
V3.5
Added the following commands: AT+TCPACKS, HTTP commands,
AT+TCPSRVTRANS?, and ATE1/ATE0.
2013-11-29
V3.6

Modified the terminal display after the client is connected to the server
(transparent/non-transparent transmission) and the description of the
AT+TCPLPORT, AT+UDPLPORT, and AT+HANDFEE
commands.

Added SMTP commands: AT+SMTPSRV, AT+SMTPAUTH,
AT+SMTPFROM, AT+SMTPRCPT, AT+SMTPSUB,
AT+SMTPBODY, and AT+SMTPSEND.

Added the AT+CNUM command to obtain my number and added the
following commands: AT+POPSRV, AT+POPAUTH,
AT+POPSTAT, AT+POPRSET, AT+POPDELE, AT+POPLIST,
AT+POPRETR, and AT+POPQUIT.
2013-12-18
V3.7

Added eCall commands: AT%EMSD, AT%EMSDSET,
AT+CECALL, AT%EMSDPUSH, etc.
2013-12-24