Initial Connections: Extra Modules
The Apex Jr. has two aquabus ports available. So this would be a good
opportunity to connect other modules using the extra aquabus port on the
Apex Jr’s base unit.
NOTE: It does not matter the order or the port you connect an aquabus
module.
Initial Connections: Home Network Integration
Connect your AquaController Display Screen. It should take about a (1)
minute to start up. Now use it, push the circular button, and restart the
APEX via the netsetup menu
Go to SYSTEM> NETSETUP> RESTART
The Apex will reboot and return momentarily.
To Next Page
Loading...