Blaster Scooter Trouble
Shoong Guide:
Always refer to manual for proper use.
1. If blaster won’t re darts:
• First check that baeries are installed and are fresh.
• Check that darts are in the clips, and that both clips are inserted correctly .
Blaster will not operate if only one clip is inserted.
• Follow Dart image on clip to show dart direcon and that is the direcon they should be installed in
blaster. (always poinng forward).
• Check for dart jams by opening grey access door at top of blaster.
Remove any loose darts. Access door must be securely shut for blaster to
operate correctly.
To Next Page
Need help?
General
