Nero 300 - Product Components and Operation; Components Overview; Filling Water; Ironing Functions

Components:
This product has many features such as a temperature regulating
dial, spraying, dry ironing, variable steam, and steam burst.
It also
features an easy to grip shape, with high heat efficiency, resulting in
quick ironing of clothes.
A
B
C
D
E
F
G
H
I
J
L
M
K
A: Non-stick soleplate
H: Spray button
B: Skirting base I: Bottom handle area
C: Water tank J: Temperature control dial
D: Spraying nozzle K: Pilot light
E: Top handle
L: Power cord guard
F: Fill cover M: Rear cover
G: Steam/spray/on-off toggle
Filling water:
1. Before filling the water tank remove the plug from the
wall socket.
2. Set the steam control to the minimum position.
3. Flip down the cover of water filling lid, then fill with water.
Spraying:
Press
the spraying button, steam will be sprayed out from the
spraying nozzle. Ensure that you keep enough water in the water tank
for smooth ongoing operation.
Steam ironing:
1.
To use steam ironing, turn the steam on/off switch to the
minimum position and set the temperature control on the dial to
the max position.
2. After the heating indicator light goes out, turn the steam on/off
switch to maximum position, steam can be sprayed and ironing
can start.
Dry ironing:
Turn the steam on/off switch to the minimum posi
tion, set the
temperature control to the suitable position, you can start dry ironing.
Storage:
After using, pull out the plug, pour out the remaining water, turn the
temperature control to minimum, let the iron cool down and place the
iron in a safe and dry place vertically.