Need help?Do you have a question about the Nervus C500-PE and is the answer not in the manual?
Step-by-step guide for initial setup of the controller and fence.
Guidelines for connecting the fence wire, emphasizing high-voltage cable for long distances.
Importance of a perfect earth connection for optimal electric fence functionality.
Procedure to test the adequacy of the earth connection by checking for shocks.
Details regarding the product warranty, its duration, and conditions for repair.
Troubleshooting for controller function using a spark gap test.
Troubleshooting steps when the power indicator fails to illuminate.
Troubleshooting steps for a non-flashing fence indicator.
Warning against connecting multiple controllers to a single earth rod to prevent damage.
Rules regarding the safe distance and connection of wires between different fence controllers.
Troubleshooting steps when no voltage is measured or felt on the fence wire.
Recommendations for proper storage and maintenance to prolong the controller's lifespan.
General guidelines for safe installation and operation of electric fences.
Regulations and requirements for setting up electric animal fences safely, including clearances and warnings.
General| Category | Power Supply |
|---|---|
| Type | ATX |
| Maximum Power | 500W |
| Wattage | 500W |
| Modular | Non-Modular |
| Form Factor | ATX |
| Input Voltage | 100-240V |
| Input Frequency | 50-60Hz |
| Cooling | 120mm Fan |
| Output | +3.3V:15A, +5V:15A, +12V:38A, -12V:0.3A, +5Vsb:2.5A |
| Connectors | 2 x 6+2 Pin PCI-e, 4 x SATA |
| Protections | OVP, UVP, OPP, SCP |
| Model | Nervus C500-PE |
To Next Page