To Next PageTo Next Page
Need help?Do you have a question about the Neslab RTE 7 and is the answer not in the manual?
General| Temperature Stability | ±0.01°C |
|---|---|
| Display | Digital |
| Cooling Capacity | 700W at 20°C |
| Refrigerant | R-134a |
| Power Supply | 50/60Hz |
Details unit compliance with standards, warranty terms, and after-sale support.
Critical safety warnings and precautions for unit operation and handling.
Overview of unit features, technical specifications, and performance data.
Concise guide for unit startup, operation, and basic maintenance tasks.
Guidelines for unit placement, ventilation, and electrical connections.
Instructions for fluid circulation setup, hose connections, and recommended fluids.
Explanation of controller buttons, indicators, setpoint adjustment, and alarms.
Guide to configuring unit settings via Setup/Tuning Loop, Timer, and Offset modes.
Details on features like external probe use, serial communication, and alarm functions.
Steps for setting up computer communication and analog I/O port calibration.
Guide for installing the automatic drain for the unit's reservoir.
Details on the functionality and setup of the RPC Remote Box.
Guidelines for fluid management, reservoir cleaning, and condenser cleaning.
Step-by-step instructions for calibrating internal/external sensors and analog I/O ports.
Comprehensive list of error codes and their resolutions for unit issues.
Checklist for common problems like unit not starting, poor cooling, or no circulation.
Guidance on temperature control, serial communication, PID values, and unit identification.
Guidelines on fluid selection and water quality standards to prevent corrosion.
Details on RS-232/RS-485 protocol, packet structure, and connector pin assignments.
Reference for commands, data bytes, checksums, and error responses for serial communication.
