Citiz service manual
32
OPERATION
5.4 Program/reset fill up level
Each coffee button can be programmed with a coffee volume for an individual cup size.
The procedure for programming/resetting is the same for both coffee buttons.
5.4.1 Programming the fill up level
Programmable volume range ........................................................................10 - 750 ml
Each new program-
ming cycle starts with
the min. volume
(10 ml after 3 sec), regard-
less of a preprogrammed
coffee volume.
1) Turn the machine on and wait for it to
be in ready mode (steady lights).
2) Fill the water tank with potable water
and insert a Nespresso capsule.
3) Place a cup under the coffee outlet. 4) Press and hold the espresso or lungo
button.
5) Release button once the desired vol-
ume is served.
6) Water volume level is now stored.
To Next Page
Loading...
