Nespresso EF 451 C 111 - Replacing Power Cord

Citiz service manual
53
REPAIRS
8.4.3 Replacing power cord
• Disconnect adapter plug of neutral wire (15).
• If present, disconnect ground wire (15, see detail).
• Unlatch cable bracket (56) with screwdriver.
56
15
15
The hoses can
remain on the water
tank connector.
Use a pair of flat pli-
ers to pull off insulat-
ing sleeve with recep-
tacle.
The flat receptacle on
the ground wire has a
special connector
latching (see detail). Press
down lever at first, then pull
off receptacle.
The cable bracket is
under tension. There-
fore, hold the cable
bracket with your finger
when unlatching it.