Citiz service manual
70
REPAIRS
8.6 Disassembly of core unit, C-range
8.6.1 General disassembly
The core unit has to be removed from the platform at first (see according chapter "plat-
form disassembly"). It is possible to perform a general disassembly of the core unit with
intact hose and wire connections to the platform (e.g. for repair, leakage check).
Remove left side panel
1. Insert disassembly tool between bottom of left side panel (3) and chassis (2).
2. Swivel disassembly tool till latch opens at the bottom.
3. Insert disassembly tool into lower gap at the front.
4. Carefully turn disassembly tool slightly to the right to open the latch.
After general disas-
sembly of the core
unit a repairing /
service holder device is
helpful for further repair
work.
To Next Page
Loading...
