Nespresso EF 451 C 111 - Replacing Electronic Control Board

Citiz service manual
86
REPAIRS
8.6.7 Replacing electronic control board with button prints
• Remove at first
- NTC connector from electronic control board,
- connector cable from flow meter,
- electronic lid (43),
- faston receptacles from electronic control board.
• Insert tip of screwdriver between chassis (2) and protective case of electronic control
board (42) to release latches. Then pull out assembly.
Replacing button prints / coffee buttons
The replacement
board is equipped
with protective hous-
ing and cover.
2
42
43
9
11