Nespresso EF 451 C 111 - Replacing Electronic Control Board (D-range)

Citiz service manual
95
REPAIRS
8.7.2 Replacing electronic control board with button prints
• Refer to page 93 for removing cover (2).
• Remove first
- NTC connector from electronic control board,
- connector cable from flow meter,
- electronic lid (43),
- faston receptacles from electronic control board.
• Insert tip of screwdriver between chassis (1) and protective case of electronic control
board (42) to release latches. Then pull out assembly.
42
12
11
1
The replacement
board (42) is
equipped with protec-
tive housing and cover.
2
42
43