Nespresso Essenza C99 - General Disassembly Steps

21
Repair
Service Manual EF 347 / EF 348 enVersion 1.0
General disassembly
Tool:
- Oval screwdriver
Procedure:
1. Remove water tank (33) and drip tray (8)
together with drip grid (7) and capsule
container (6).
2. Remove 2 screws (2) on the front side of
the machine.
3. Place machine on the repairing/service
holder device (see page 42).
4. Remove 6 screws (2) on the bottom of the
machine.
5. Swing out and remove both side panels (5).
6. Remove lower chassis (22).
5
5
33
6 + 7 + 8
2
2
22