EN
4
Do not use the lever as a handle to move the machine.
Otherwise, appliance malfunction may result.
Do not store the appliance in the following locations.
Otherwise, appliance malfunction may result.
- near heaters
- in areas where temperatures fluctuate significantly
- in areas exposed to direct sunlight
- in humid/moist locations
- outdoors or in dusty locations
When transporting the appliance, observe the following directions.
Otherwise, appliance malfunction may result.
-
Empty, clean, and dry the water tank, capsule container, drip base, and drip tray.
-
Dry the inside of the appliance (see Page 12)
-
Use the original buffer material to pack the appliance into the original box.
l Cautions regarding locations to install the appliance
Do not use this appliance outdoors, in moving vehicles, boats, or airplanes.
Otherwise, appliance malfunction, an electric shock, or fire may result.
Do not place the appliance in a location where it may be exposed to direct
sunlight.
Otherwise, appliance malfunction or a fire may result.
Do not place the appliance on or beside hot surfaces such as heating systems,
stoves, ovens, gas burners, or similar objects.
Otherwise, appliance deformation, appliance malfunction, or a fire may result.
Do not install the appliance where it may be splashed with water.
Otherwise, appliance malfunction, an electric shock, or fire may result.
Plug the appliance into easily accessible wall sockets.
Place the appliance on a surface resistant to coffee, water, descaler, or similar
solutions.
Such liquids may damage tables and countertops, and may discolor or deform them.
Do not use the appliance near walls or furniture.
Steam or heat may damage, discolor, or deform walls, furniture, or other objects.
Do not place on heat-sensitive lugs or furniture, unstable locations or
locations vulnerable to vibrations created during brewing.
Furniture or rugs may be damaged.
Ensure that the appliance does not protrude from the edge of a table or
countertop.
There is a risk of the appliance falling, causing burns or injury.
l Cautions regarding power cord and wall socket
Only wall sockets rated at 15 A or more at 100 VAC must be used for the
appliance alone.
Do not plug any other electrical devices into the same socket as the appliance. Doing so
may overheat it and possibly cause a fire.
Do not use extension cords or various kinds of power strips.
Otherwise, overheating or a fire may result.
Be sure to plug the power plug into the wall socket after you have installed
your Nespresso machine.
Otherwise, burns or injury may result.
Regularly wipe dust off the power plug and wall socket.
Unplug the power plug and wipe off any dust using a dry soft cloth. If any dust has
accumulated, a fire may result.
Do not damage the power plug and/or power cord.
Otherwise, an electric shock or fire may result.
- Do not damage or modify the power plug and/or power cord.
- Keep the power cord away from surfaces that may become hot or any other heat sources.
- Do not forcibly bend, twist, or bundle the cord.
- Do not force cords into small spaces. Do not place heavy items on them. Keep them
away from sharp surfaces.
If the power plug or power cord is damaged, contact the Nespresso Club (see Page 16).
Be sure to plug the power plug all the way into the wall socket.
Otherwise, an electric shock or fire may result.