EasyManua.ls Logo

Nespresso ESSENZA MINI Series - Emptying the System

Nespresso ESSENZA MINI Series
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
15
CN
Remove the water tank
and open the lever.
Place a container under
the coffee outlet.
󶌖󹢲󴬱󶚔󳌨󳪍󸤒󳧼
󴌲󾗚󲔩󲃔󲈒󱲡󱿂󱘕󳿑
󳻿󶷉󱘈󱙂󲸣󲏝󾗘
Emptying process begins.
Machine switches off
automatically when procedure
is finished.
Press both the Espresso and
Lungo buttons for 5 seconds.
Both LEDs blink alternatively.
󱿻󴀿󳬟󱘕󴳞󶵌󲃔󲈒󲃅󲡱󴊪
󲃔󲈒󳬟󹜗󶋓󹚇󾗘
󱘺󱙂LED󳬙󶆻󵉉󱞵󱛽󴇱
󹠙 󵋭󾗘
Close the lever.
Empty and clean the used capsule container,
the drip tray and the drip base.
󱯃󹠜󳧼󴌲󾗘
󴸃󶐁󳌨󴸃󴲅󶡭󲒎󵷒󾗚󴾚󴬱󵷚󲃅󴾚󴬱
󵷚󳍢󳎁󾗘
To enter the emptying mode,
press both the Espresso and
Lungo buttons to turn the machine
off.
󸴔󱮦󴸃󶐁󴝙󳑎󾗚󹺘󱭴󱿻󴀿󳬟
󱘕󴳞󶵌󲃔󲈒󱾜󲡱󴊪󲃔󲈒󳬟󹜗
󴊜󱯃󹠜󴉝󲏝󵫰󴻣󾗘
Emptying the system before a period of non-use and for frost protection, or before a repair /
󲺽󹝬󴀿󹠣󱘗󱡋󵫞
󹡩󶳶󹨛󳦕󶴗󱣽󱴚󹧟󴸃󶐁󴉝󲏝
To exit the descaling mode, press both the Epresso and
Lungo buttons for 5 seconds.
󸵯󱲡󹢲󲗜󴝙󳑎󴀿󾗚󱿻󴀿󳬟󱘕󴳞󶵌󲃔󲈒󲃅󲡱󴊪󲃔󲈒󳬟
󹜗󶋓󹚇󾗘
Empty the drip base.
󴸃󶐁󴾚󴬱󵷚󳍢󳎁󾗘
When ready, repeat steps
4 and 7 to now rinse the
machine. Repeat twice.
󹄟󲠷󴦠󺁃󲃅󴦠󺁃
󱰟󴲅󴉝󲏝󾗚󹄟󲠷
󱘺 󴤥󾗘
Water hardness: / 󴬱󵵙󶁞󳍿
Descaling after /
󹢲󲗜󴀿󹠣
fH dH CaCO
3
(40 ml)
H (HIGH) /
36 20 360 mg/l 300 fH
French degree / 󴰢󲓣󳍿
M (MEDIUM) /
18 10 180 mg/l 600 dH
German Grade / 󳕿󲓣󳍿
L (LOW) /
0 0 0mg/l 1200 CaCO3
Calcium Carbonate / 󶃍󹁳󹚁
󴉝󲏝󳐴󲧆󴸃󶐁󾗘
󶌲󳍙󶳶󴊓󲀀󾗚󴉝󲏝󱞵󷋩󱶴󱯃󴉝󾗘
UM_NESPRESSO_ESSENZA_MINI_Z3_.indb 15 20.02.17 14:20

Related product manuals