Nespresso Gemini CS220 PRO - After Sales Menu for Service Technicians

ServicemanualEF702/705
31
P R O G R A M M I N G
Directwater
Settings:OFF/ON
Factorysetting:OFF
Setthismenupointto
 "OFF"ifthewatertanksarefilledmanually.
 "ON"onlyifthecoffeemachineisconnectedtothewatersupply.
See"Directwaterconnection"onpage20formoreinformation.
Filter:ON
Commands:Changefilter(left/rightarrow)/Exit
Usethismenupointtoreplaceausedwaterfilteroncethemessage"Changefilter"
appearsonthedisplay(see"Changefilterelements(optional)"onpage42).
Thismenupointhastobeenabl edintheaftersalesmenu(seepage32).
Exit
Usethiscommandtoexitthepowerusermenuandtoresumestandbymode.
3.3 Aftersalesmenu
Thismenu
 isforservicetechniciansonly,
 allowsbasicsettingsandconfigurations,
 hastwointerdependentmenupoints("Filter"and"Waterhardness"),
 affectsthepowerusermenustructure.
ThecustomersettingfileoftheServiceSticksoftwarecontainssettingsand
configurationsoutoftheaftersalesmenu(see "Customersettings(Client
PC Software)"onpage38).
3.3.1 Accesstoaftersalesmenu
1. Switchcoffeemachinetostandbymode.
2. Pressallcoffeebuttonsofbothcoffeeunitssimultaneously,untilthefirstmenu
pointisdisplayed.
Formenunavigationreferto"Accesstopo werusermenu"onpage28.