Nespresso VERTUO POP User Manual

EN
.
11
3
Plug the power cord in, remove the cup support and place
an empty container (of at least 1 L / 34 fl oz) under the coee
outlet.
4
Open and close the machine. Ensure the lever is in lock
position.
i
The light will blink while the machine is heating up. It will take
approximately 30 seconds. When the light becomes steady the
machine is ready. Make sure that no capsule is inserted.
3x <2s
5
Press the buon 3 times within 2 seconds to start rinsing.
Let the rinsing procedure complete automatically. When the
light becomes steady white, the cycle is complete.
i
It should take less than 2 minutes before the rinsing process begins
and water starts to flow. This procedure may take up to 7 minutes.
FIRST STEPS  PAGE 2/2

Nespresso VERTUO POP Specifications

General

Product Type	Coffee Maker
Brand	Nespresso
Model	VERTUO POP
Cup Sizes	Espresso (40ml), Double Espresso (80ml), Gran Lungo (150ml), Mug (230ml)
Heating Time	30 seconds
Dimensions	136 x 426 x 250 mm
Weight	3.5 kg
Power	1260 W
Voltage	220-240 V
Pump Pressure	19 bar
Cable Length	75 cm
Capsule Compatibility	Nespresso Vertuo Capsules
Automatic Ejection	Yes
Color Options	Black, Red, Blue
Energy Saving Mode	Yes