1
2
7 sec.
2
1
0.8 l
19
EN
KR
To exit the descaling
mode, hold the button for
at least 7 seconds.
Fill the water tank with
fresh drinking water and
put it back in place on the
machine.
Place a container
(minimum volume: 0.8 l)
under the coee outlet.
To start descaling, lock the
machine by turning the lever
left and push the button.
The machine will stop
automatically when complete.
Empty, rinse and clean
the water tank and cup
support thoroughly.
When ready, push the button to rinse the machine. The machine will stop automatically when
complete. The procedure can be stopped at any time by pushing the button.
NOTE: if the machine is completely scaled, the descaling program may not function and the machine will stop and blink.
Pause the program in this case for several minutes, allowing the descaling agent to penetrate the scale build-up, then push the
button again to restart the descaling.
The button will stop blinking rapidly and become steady.
The machine is now ready for use.
Descaling is completed. Allow the machine to dry for
10 minutes before using it.
This machine is equipped with a descaling alert: the light will
blink alternately 3 times, then become steady. Machine can only
be operated to make coee a few more times once the alert
appears before descaling becomes mandatory.
15.
13.
10. 11. 12.
14.
16.
18.
17.
To Next Page
Loading...
