Need help?Do you have a question about the nest Thermostat E and is the answer not in the manual?
General| Interface | WLAN |
|---|---|
| Certification | REACH |
| Product color | White |
| Memory function | - |
| Wi-Fi frequency | 2.4 GHz |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Smart thermostat | Yes |
| Bluetooth version | 4.0 |
| Languages support | DUT, ENG, ESP, FRE, ITA |
| Units of measurement | °C |
| Suitable for boiler types | Electric |
| Power source | Battery |
| Power consumption per month (max) | 1 kWh |
| Display resolution | 320 x 320 pixels |
| Display size (HxV) | 45 x 45 mm |
| Mobile operating systems supported | Android, iOS |
| Sustainability certificates | RoHS |
| Handheld remote control | No |
Weight and Dimensions| Width | 81.6 mm |
|---|---|
| Height | 94.4 mm |
| Weight | 408 g |
Turn off power to your HVAC system at the breaker or system switch to prevent damage.
Take a clear picture of the thermostat wires and their terminal labels for reference.
Learn to recognize and avoid using incompatible wiring like stranded or high-voltage wires.
Enter your thermostat's wire connectors into the online checker for a custom wiring diagram.
Remove any jumper wires connecting terminals on the old thermostat as they are not needed.
Connect system wires to the appropriate terminals on the Nest base according to the wiring diagram.
Turn the power back on at the breaker box or system switch to power the thermostat.
To Next Page
