Rev 01
|
GrowSphere MAX User Manual
129
|
Controller Operation
GrowSphere
Operating System
Manual Operation
Perform the following steps to enable manual operation of the pump, main valve, booster
pump, and dosing channel:
1. Tap the relevant device
A dropdown menu is
displayed.
2. Select the device state
Output device can be set to:
Auto - Device is activated
according to the irrigation
program.
Manual On - Device is
activated.
Manual Off - Device is turned
off.
3. Verify device state
The icon indicates that the
device is in Manual mode.
NOTE
The device remains in
manual mode until it is set
back to automatic.
Pause Mainline
Tap to pause the program.