The Wi-Fi Link Test graphs save and display data
for up to 24 hours in the past if the unit stays
linked. The default time interval shown is 2
minutes.
Under each graph, a legend table displays the
Current, Minimum, Maximum, and Average meas-
urements. The Current column contains meas-
urements from the last second. Min, Max, and
Avg columns show cumulative measurements.
Signal (dBm) graph: Plots the signal strength in
dBm of the connected AP.
l
Green vertical bars - The tester roamed to a
new AP.
l
Signal - The AP's signal strength in dBm.
l
Noise - The noise level in dBm on the
channel used.
l
SNR - The network's signal-to-noise ratio in
decibels (dB).
AutoTest App and Profiles
216
To Next Page
Loading...