Timeout Threshold
This threshold controls how long the
CyberScope Air waits for a response from the
target before failing the test.
Reverse Grading
When Reverse Grading is enabled, a test is
considered successful if it fails and a failure if it
succeeds. The Results Codes section of the
results screen includes the message "Grading
has been reversed".
For example, you might have a critical server
used by an accounting department. This server
must be accessible by the accounting VLAN not
by any other networks. To verify the con-
figuration, you could set up a Ping test to with
Reverse Grading enabled. Running a Wi-Fi
AutoTest profile to the server's guest SSID with
the reverse graded test reports a ping failure,
which is the desired outcome.
Ping Test Results
AutoTest App and Profiles
287
To Next Page
Loading...