netAlly CyberScope Air - Page 412


o
Tap Telnet or SSH to open the JuiceSSH
app.

o
Tap Back to return to the primary
FABlist.
Adding Nmap Tests Using the FAB
Using the FAB menu to create additional Nmap
tests for Discovery allows you to add and modify
tests, allowing you to fine-tune test settings and
collect additional Nmap information.
To add or edit an Nmap test:
1. Tap a device on the main discovery list
screen to open the details screen for the
device. This screen includes any existing
Nmap tests already set up for the device.
2. Create a new Nmap test:
a. Tap the FABbutton.
b. Select Nmap to open the list of
available Nmap tests.
c. Select a test, and then tap OK. This runs
the test and opens a new summary card
for the test on the device details screen.
Discovery App
412