that they are grouped appropriately for your AP
types and environment.
For example, if BSSIDs from different APs are
being grouped together inaccurately, you can
disable the rule that is causing the grouping. If
your AP manufacturer uses a BSSID variation
scheme that is not covered by one of the six
default rules, you can add a new rule.
Tap the setting to open the APGrouping Rules
list screen. The image below shows the six
default AP Grouping Rules on the CyberScope
Air. The Prefix filters in all of the default
grouping rules are set to 000000-000000.
Discovery App
469
To Next Page
Loading...