NetApp AFF A Series Install And Setup

Option 1: Two-node switchless cluster
Cable your two-node switchless cluster.
About this task
Be sure to check the illustration arrow for the proper cable connector pull-tab orientation.
As you insert the connector, you should feel it click into place; if you do not feel it click,
remove it, turn it around and try again.
Steps
1.
Cable the cluster interconnect ports e0a to e0a and e0b to e0b with the cluster interconnect cable.
2. Cable the controllers to either a UTA2 data network or an Ethernet network:
5

NetApp AFF A Series Specifications

General

Brand	NetApp
Model	AFF A Series
Category	Server
Language	English