Name: NetApp AFF A220
Brand: NetApp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2. To cable your storage, see Cabling controllers to drive shelves

Option 2: Cable a switched cluster, unified network configuration

Management network, UTA2 data network, and management ports on the controllers are

connected to switches. The cluster interconnect ports are cabled to the cluster

interconnect switches.

You must have contacted your network administrator for information about connecting the system to the

switches.

Be sure to check the illustration arrow for the proper cable connector pull-tab orientation.

As you insert the connector, you should feel it click into place; if you do not feel it click, remove

it, turn it around and try again.

Steps

1. You can use the graphic or the step-by step instructions to complete the cabling between the controllers

and the switches:

Questions and Answers:

Need help?

Do you have a question about the NetApp AFF A220 and is the answer not in the manual?

NetApp AFF A220 Specifications

General