NetApp FAS User Manual

Step 6: Return the failed part to NetApp
After you replace the part, you can return the failed part to NetApp, as described in the
RMA instructions shipped with the kit. Contact technical support at
NetApp Support, 888-
463-8277 (North America), 00-800-44-638277 (Europe), or +800-800-80-800
(Asia/Pacific) if you need the RMA number or additional help with the replacement
procedure.
FAS8200 System Documentation
Install and setup
Cluster configuration worksheet - FAS8200
You can use the
Cluster Configuration Worksheet to gather and record your site-specific IP addresses and
other information required when configuring an ONTAP cluster.
Start here: Choose your installation and setup experience
For most configurations, you can choose from different content formats.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
For MetroCluster configurations, see either:
•
Install MetroCluster IP configuration
• Install MetroCluster Fabric-Attached configuration
Installation and setup PDF poster - FAS8200
You can use the PDF poster to install and set up your new system. The
AFF FAS8200 Installation and Setup
Instructions
provides step-by-step instructions with live links to additional content.
Installation and setup video - FAS8200
The following video shows end-to-end software configuration for systems running ONTAP 9.2.
AFF FAS8200 Setup Video
Maintain
Boot media
304

NetApp FAS Specifications

General

Brand	NetApp
Model	FAS
Category	Disk array system
Language	English