NetApp FAS User Manual

6. Reestablish any SnapMirror or SnapVault configurations.
Step 6: Return the failed part to NetApp
After you replace the part, you can return the failed part to NetApp, as described in the RMA instructions
shipped with the kit. Contact technical support at
NetApp Support, 888-463-8277 (North America), 00-800-44-
638277 (Europe), or +800-800-80-800 (Asia/Pacific) if you need the RMA number or additional help with the
replacement procedure.
FAS8300 and FAS8700 System Documentation
Install and setup
Start here: Choose your installation and setup experience
For most configurations, you can choose from different content formats.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
For MetroCluster configurations, see either:
• Install MetroCluster IP configuration
• Install MetroCluster Fabric-Attached configuration
Quick guide - FAS8300 and FAS8700
This guide gives graphic instructions for a typical installation of your system from racking
and cabling, through initial system bring-up. Use this guide if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
FAS8300 and FAS8700 Installation and Setup Instructions
Videos - FAS8300 and FAS8700
There are two videos; one showing how to rack and cable your system and one showing
an example of using the System Manager Guided Setup to perform initial system
configuration.
424

NetApp FAS Specifications

General

Brand	NetApp
Model	FAS
Category	Disk array system
Language	English