NetApp FAS User Manual

Step 6: Return the failed part to NetApp
After you replace the part, you can return the failed part to NetApp, as described in the
RMA instructions shipped with the kit. Contact technical support at
NetApp Support, 888-
463-8277 (North America), 00-800-44-638277 (Europe), or +800-800-80-800
(Asia/Pacific) if you need the RMA number or additional help with the replacement
procedure.
AFF A700 and FAS9000 System Documentation
Install and setup
Start here: Choose your installation and setup experience
For most configurations, you can choose from different content formats.
•
Quick steps
A printable PDF of step-by-step instructions with live links to additional content.
•
Video steps
Video step-by-step instructions.
•
Detailed steps
Online step-by-step instructions with live links to additional content.
For MetroCluster configurations, see either:
• Install MetroCluster IP configuration
• Install MetroCluster Fabric-Attached configuration
Quick steps - AFF A700 and FAS9000
This guide gives graphic instructions for a typical installation of your system from racking
and cabling, through initial system bring-up. Use this guide if you are familiar with
installing NetApp systems.
Access the Installation and Setup Instructions PDF poster:
AFF A700 Installation and Setup Instructions
FAS9000 Installation and Setup Instructions
Video steps - AFF A700 and FAS9000
There are two videos; one showing how to rack and cable your system and one showing
an example of using the System Manager Guided Setup to perform initial system
configuration.
554

NetApp FAS Specifications

General

Brand	NetApp
Model	FAS
Category	Disk array system
Language	English